碘化阶层孔氧化硅纳米球对水中典型有机氯污染物的吸附性能研究

采用共缩聚法,成功地原位合成了碘改性的阶层多孔氧化硅纳米球（SiO₂-I）,研究了其基于卤键作用对典型有机氯污染物六六六的吸附性能,并考察了改性剂I-硅烷含量和pH值对吸附效果的影响.实验结果表明,该纳米材料对六六六表现出优异的吸附富集性能,吸附速率快,60 min内对六六六的去除率为71.6%,240 min内达到吸附平衡,去除率可达98.3%,最大吸附量为178.6 mg·g^-1;吸附动力学符合拟二级动力学模型;碘物种的加入提高了阶层多孔氧化硅的吸附速率和吸附效率.另外,为了便于纳米吸附材料的分离,本研究对SiO₂-I纳米球进行了磁性化.研究发现,磁性化修饰后,SiO₂-I纳米材料仍然保留对六六六优异的吸附富集性能,240 min时的吸附去除率达90.3%.     

硅胶表面TEOS疏水化改性及吸附VOCs特性

以正硅酸乙酯（TEOS）为疏水改性剂,通过硅胶表面的羟基接枝反应,得到具备一定疏水性的改性硅胶;利用BET、FT-IR、XRD和TG-DTG等手段对改性硅胶的结构及稳定性进行了表征;在此基础上考察了改性硅胶对各类有机废气的吸附性能.结果表明,TEOS成功接枝在了硅胶表面,改性硅胶不仅具备一定的疏水性,而且机械强度增加到原来的66.85%,稳定性也都得到了提高; 550℃空气下焙烧后的改性硅胶仍具有疏水性且吸附容量是焙烧之前的2倍;在高湿度高浓度的废气治理中,TEOS改性硅胶表现出更高的吸附能力和优良的热再生性能.高浓度下改性硅胶的吸附容量是低浓度下的10倍且不受水汽的影响;改性硅胶循环10次的吸附/脱附几乎不变,且在一定条件下,15~30min就达到90%的脱附率.     

Preconcentration and determination of trace copper(II) in natural water using silica gel modified with 1-(2-pyridylazo)-2-naphthol

Trace copper (II) in water can be preconcentrated using silica gel modified with 1-(2-pyridylazo)-2-naphthol (PAN) and be determined spectrophotometri-cally. The conditions for the preconcentration were studied. The method was applied to both artificial and natural water samples and the results suggest that copper (II) of ppb level in water can be measured accurately after the preconcentration.     

绿色高强混凝土——硅灰混凝土

硅灰是冶金厂生产硅铁和工业硅过程中产生的废灰，硅灰混凝土为绿色混凝土，它不仅节约了水泥熟料，而且改善了环境，大大促进了混凝土和建筑工程的健康发展，混凝土中掺入硅灰可得到高强和超高强混凝土，用此混凝土浇制的结构物其安全度大大提高，经济效益显著，硅灰混凝土还可以有效抑制碱骨料反应，提高结构物的安全度和耐久性，延长使用寿命。     

Possible Utilization of Silica Gel Sludge for the Removal of Phenol from Aqueous Solutions: Laboratory Studies

This paper discusses the adsorption capacity of silica gel sludge for phenol removal from aqueous solution. Kinetic experiments showed that phenol adsorption was completed after 2 h. Adsorption isotherms were measured for phenol from aqueous solution onto silica gel sludge under various pHs and temperatures. Results showed that the adsorption capacities for phenol was increased as pH decreased from 6.5 to 2. Temperature also was found to affect the adsorption isotherm. As temperature increases from 30 to 50°C, the adsorption capacity increases. The adsorption equilibrium of phenol on silica gel sludge was described by the linear Freundlich and Langmuir models. Furthermore, results showed that the isotherm parameters fit both linearized Langmuir and Freundlich adsorption isotherms. The Freundlich and Langmuir parameters at optimum pH was found as K _f=2.89, 1/n=0.23 and K _d=22.0, q _m=7.98, respectively. Whereas, for those at optimum temperature it was observed as K _f=2.87, 1/n=0.16 and K _d=20.93, q _m=7.91, respectively.     

低浓度臭氧在含钴盐硅胶上的吸附研究

常压下对含钴盐硅胶进行低浓度臭氧的吸附实验，吸附达到饱和后用氮气作为载气加热解吸。结果显示，含钴盐的硅胶对臭氧具有较强的吸附能力；臭氧解吸量随着解吸温度的上升而增加；吸附了臭氧的含钴硅胶粒子在常温(313．15K)下可在60min内不问断解吸出臭氧。     

Hydrothermal liquefaction phase behavior of microalgae & model compounds in fused silica capillary reactor

A fused silica capillary reactor combined with a heating/cooling stage, a microscope and a digital camera were used to investigate phase behavior during the hydrothermal liquefaction of microalgae (Dunaliella tertiolecta) and model compounds, including soya protein and glycine, starch, glucose and xylose, stearic acid and palmitic acid. Bubbles were generated at 246°C and disappeared at 360°C upon heating when Dunaliella tertiolecta used as feedstocks. Moreover, liquid products were generated at 300°C upon heating and oily liquid products began to separate out at 250°C upon cooling. The phase behavior of soya protein was similar to that of the Dunaliella tertiolecta. Meanwhile, there only observed the bubbles generation during hydrothermal liquefaction of glycine. Heating the starch, glucose and xylose above 350°C generated black solids from carbonization. Stearic acid and palmitic acid only had the process of melting, dissolution, dispersion and precipitation.     

二乙烯三胺改性聚多巴胺包覆硅胶吸附日落黄

采用二乙烯三胺(DETA)改性聚多巴胺(PDA)包覆硅胶(SG)得到吸附剂SG@DETA/PDA。通过FTIR、SEM和氮气吸附-脱附等技术对SG@DETA/PDA进行了形貌和结构表征,并考察了其对阴离子染料日落黄的吸附性能。表征结果显示,SG@DETA/PDA表面有PDA微球团聚形成的较为致密的包覆层,其比表面积和孔体积均比吸附剂SG@PDA有小幅提高。实验结果表明:SG@DETA/PDA吸附日落黄的最佳工艺条件为溶液p H 2.0、吸附时间2.0 h、初始染料质量浓度150 mg/L,在上述最佳工艺条件及298 K温度条件下SG@DETA/PDA对日落黄的吸附容量为175.56 mg/g。SG@DETA/PDA吸附日落黄的过程可以分别用准二级动力学方程和Langmuir等温吸附方程很好地拟合,该吸附过程主要是通过静电作用的单分子层吸附,是一个吸热自发的熵增过程。     

MCM-41介孔分子筛的合成及其对铜离子的吸附性能简

以微硅粉为硅源，CTAB和PEG-6000为模板剂，合成MCM-41介孔分子筛。采用XRD、N₂吸附-脱附曲线、FTIR以及TEM表征了其结构、比表面积、孔径分布及晶体形貌，并且以该样品为吸附剂，对含Cu²⁺的溶液进行了静态吸附实验。结果表明，以微硅粉为硅源成功合成了具有典型六方排列孔道结构的MCM-41，其比表面积为869.5 m²/g，孔容为0.97 cm³/g，平均孔径为3.3 nm；溶液pH为5~6时，MCM-41对Cu²⁺的去除效果最好；MCM-41对Cu²⁺的最大吸附吸附容量36.3 mg/g；MCM-41对Cu²⁺的吸附性能符合Langmuir吸附方程的特征。动力学研究表明，该过程符合准二级动力学模型。     

固相萃取-GC/MS法测定地表水中3-甲基吲哚

采用微球硅胶键合C_(18)固相萃取柱萃取水样中的3-甲基吲哚,并用气质联用法测定,方法在0 mg/L~10.0 mg/L范围内线性良好,方法检出限为0.2μg/L。空白水样3个质量浓度水平的加标回收率为89%~94%,7次测定结果的RSD为2.3%~6.9%。用该方法测定7个实际地表水样品,其中4个地表水样品检出3-甲基吲哚,地表水样的加标回收率为81.5%~97.0%。